Thank to Hamana-sensei and Phillip for allowing us to use their photos.
Some photos that were discussed in Episode 6
- Start with the base. I built mine 10’ x 10’ using 2×12’s (this gives you approx 12 extra inches…). This way I could actually have a ro in the floor. I simply made four boxes, 5×5 each, so they all come together in the middle at one point, also enabling the ro (there would not be structure in the way…)
- Floor. I used 2 layers of 3/4” plywood. 1 layer was a little too saggy….
- The simplest way to have a modular tea room in retrospect is to have 3 fixed walls, however you want to do them, and make the 4th wall one that can move to make a 3 mat room.
- Walls. 2 of my walls are fixed, using 1/4” plywood with a maple veneer. The other 2 walls are made of hollow core doors. I stained it all because I like the dark.
- Tracks. For my 2 walls with hollow core doors, I used a dado blade on a table saw to cut out a track big enough to hold the hollow core doors. 1 track for the floor and 1 for the ceiling.
- Trick. Here is the trick — I made a total of 5 tracks — one for the floor and one for the ceiling for the 2 moveable walls of hollow core doors. The 5th track is an extra ceiling track for when I switch to a 3 mat (or smaller room). This one stays on the ceiling at all times and is shown in the 5th image.
In episode 4 we discuss the SHUHALLY tea room. These are some of Aarons photo from the SHUHALLY.
These are some photos of Toinseki from 2005. Toinseki was discussed in Episode 4.